{"id":3371,"date":"2014-03-01T00:15:00","date_gmt":"2014-02-28T23:15:00","guid":{"rendered":"https:\/\/www.zerodonto.com\/en\/2014\/03\/digital-impression-by-means-of-itero-intraoral-scanning-system-to-fabricate-zirconia-single-crowns\/"},"modified":"2017-10-20T10:30:41","modified_gmt":"2017-10-20T08:30:41","slug":"digital-impression-itero-intraoral-scanning","status":"publish","type":"post","link":"https:\/\/www.zerodonto.com\/en\/2014\/03\/digital-impression-itero-intraoral-scanning\/","title":{"rendered":"Digital impression by means of Itero intraoral scanning system to fabricate zirconia single crowns"},"content":{"rendered":"

Stereomicroscopic analysis of the precision of fit of PFM frameworks fabricated with traditional impression vs zirconia prostheses produced using an optical impression technique<\/p>\n

Case presentation<\/strong><\/h2>\n

A 42 year-old female patient, unsatisfied by the esthetics of her smile, asked for the rehabilitation of the maxillary incisors by means of fixed prostheses, substituting 4 previous metal-ceramic single crowns.<\/p>\n

<\/p>\n

\"itero<\/a><\/p>\n

\"itero<\/a><\/p>\n

After the study of the case and the routinary clinical and laboratory analyses, the previous restorations were removed and the preparations of the abutment teeth were revised, making 1 mm circumferential chamfers.<\/p>\n

 <\/p>\n

\"FAB_8567\"<\/a><\/p>\n

\"itero<\/a><\/p>\n

\"itero<\/a><\/p>\n

\"itero<\/a><\/p>\n

\"itero<\/a><\/p>\n

The periodontal tissues were conditioned to a healthy state using a temporary fixed acrylic resin prosthesis, that was relined so as to make the gingival tissues properly scalloped.<\/p>\n

 <\/p>\n

\"itero<\/a><\/p>\n

After 3 weeks of provisionalization, the precision impressions were taken using the following techniques:
\n– conventional impression by means of polyethers;
\n– optical impression using the Itero intraoral scanning system.<\/p>\n

\nConventional impression<\/strong><\/h3>\n


\n<\/strong>As to the conventional impression technique, the gingival tissues were displaced using two retraction cords; a #000 and a #2 cords were used to displace vertically and horizontally respectively the marginal tissues. The second cord was dipped in a 20% ferric sulfate astringent solution to improve hemostasis.<\/p>\n

 <\/p>\n

\"itero<\/a><\/p>\n

\"itero<\/a><\/p>\n

\"itero<\/a><\/p>\n

Then, a conventional one-step two-phase precision impression was taken, using medium- and light-consistency polyether impression materials.<\/p>\n

 <\/p>\n

\"itero<\/a><\/p>\n

\"itero<\/a><\/p>\n

The master cast was poured with class IV extra-hard stone and then it was duplicated.
\nWith a merely speculative purpose, such a conventional impression was taken to compare the operative procedures with those of the optical impression, as well as to fabricate four gold alloy single frameworks, in order to relate the marginal and internal values of precision of fit with those achieved with zirconia cores fabricated using the optical impression workflow.<\/p>\n

 <\/p>\n

Digital impression<\/strong><\/h3>\n

<\/i>
\nAs regards the digital impression, the Itero intraoral scanning system was used.<\/p>\n

 <\/p>\n

\"itero<\/a><\/p>\n

This system is based on a confocal laser scanning technique with focal planes at 50 microns, it records 300-350 images per abutment and it is provided with autofocus up to 3 cm. About 100-110 static shots per arch are taken and then they are merged by means of specific reference points identified by the software, which is able to reduce the mean error interpolating the images.<\/p>\n

 <\/p>\n

\"itero<\/a><\/p>\n

The gingival tissues were displaced using a single #2 retraction cord without any astringent agent.
\nSubsequently, an optical impression was taken using the Itero system and a dedicated intraoral scanner. The impression procedure suggested by the software was followed: after gently removing each retraction cord, the three-dimensional morphology of each abutment was recorded. The image was taken as soon as the software interpolated correctly each abutment surface.<\/p>\n

\n
\n
<\/div>\n
<\/embed><\/div>\n<\/div>\n
Impronta digitale con sistema Itero<\/div>\n<\/div>\n

Moreover, the system needed to record the morphology of the teeth adjacent to the abutments (2 per each emiarch) as well as of the antagonist teeth, in order to acquire the occlusal reference points necessary to the CAD phase.<\/p>\n

\"itero<\/a><\/p>\n

\"itero<\/a><\/p>\n

\"itero<\/a>
\nCase finalization<\/strong><\/h3>\n


\n<\/strong>Four gold alloy single frameworks were fabricated from the stone master cast poured from the conventional impression, according to the traditional lost wax technique.<\/p>\n

 <\/p>\n

\"itero<\/a><\/p>\n

Differently, a stereolitographic working model of the scanned area was obtained from the digital impression.<\/p>\n

 <\/p>\n

\"itero<\/a><\/p>\n

\"itero<\/a><\/p>\n

Then, two sets of zirconia single cores with a thickness of 0.5 mm were produced: one set was automatically modelled by the Cares software (Straumann) while the other one was anatomically modeled using the Katana system (Noritake).<\/p>\n

\"itero<\/a><\/p>\n

\"itero<\/a><\/p>\n

The fit of the frameworks was checked intraorally using a white silicon disclosing agent inside the metal copings and a black one in the zirconia cores, so as to highlight any pressure spot on the internal surface of each crown.<\/p>\n

 <\/p>\n

\"itero<\/a><\/p>\n

\"itero<\/a><\/p>\n

In all systems, the passive fit was considered clinically optimal.<\/p>\n

\"A<\/a><\/p>\n

\"AB<\/a><\/p>\n

\"ABC<\/a><\/p>\n

 <\/p>\n

Then, the marginal precision of each coping was checked using a stereomicroscope (30x), gently displacing the marginal tissues apically by means of metal anatomical gingival divaricators. In all systems no clinically relevant marginal misfit was noticed.<\/p>\n

 <\/p>\n

\"itero<\/a><\/p>\n

\"itero<\/a><\/p>\n

Both sets of zirconia copings were veneered by means of dedicated ceramics; after the intraoral tryin, the esthetic evaluation was made in accordance with the patient.<\/p>\n

 <\/p>\n

\"itero<\/a><\/p>\n

\"itero<\/a><\/p>\n

\"itero<\/a><\/p>\n

\"itero<\/a><\/p>\n

Finally, it was decided to cement the zirconia-ceramic single crowns fabricated with the Katana system using a resin luting agent.<\/p>\n

 <\/p>\n

\"itero<\/a><\/p>\n

\"FAB_9545\"<\/a>
\n\"itero<\/a><\/p>\n

\"itero<\/a><\/p>\n

\"itero<\/a><\/p>\n

\"itero<\/a><\/p>\n

The cement excesses were carefully removed using teflon tips on a sonic handpiece under a stereomicroscope, so as not to wound the gingival tissues.<\/p>\n

 <\/p>\n

\"itero<\/a><\/p>\n

\"itero<\/a><\/p>\n

The occlusal contacts were carefully checked and balanced both in centric occlusion and in lateral and protrusive movements.<\/p>\n

 <\/p>\n

Analysis of the marginal and internal precision of fit<\/strong><\/h3>\n


\n<\/strong>The marginal precision and internal fit of both the metal (considered in the literature as the gold standard for marginal fit) and the zirconia cores were checked by means of a stereomicroscopical analysis (40x) of the longitudinal section of each coping. Consequently, both the sets of zirconia frameworks were duplicated using the same files: a first set was veneered for the subsequent clinical procedures while a second one was used to fabricate the specimens to be sectioned.
\nViceversa, the metal cores were not duplicated, since they had not to be veneered.
\nWithin the limits due to the absence of a reference metal master cast, the present clinical study was performed to verify the in vivo precision of prosthetic single crowns; thus, it was necessary to seat each coping on the relative working model.
\nThe metal frameworks were cemented using a zinc-phosphate cement while the zirconia cores were luted with the same resin cement used for the clinical cementation of the crowns. Then, each coping was embedded in resin blocks and the longitudinal sections of the cores were made, in order to evaluate the marginal and internal precision of fit of the frameworks. The cut was made along the longitudinal axis of the tooth, from the middle area of the buccal cervical convexity to the middle area of the incisal margin. Finally, the measurements of the marginal precision at the finish line (MO: Marginal Opening, AMO: Absolute Marginal Opening) and of the internal fit in the axial (coronal, mid, incisal) and incisal areas (buccal, mid, palatal) were made using a point-to-point micrometric measuring software.<\/p>\n

 <\/p>\n

\"itero<\/a><\/p>\n

\"itero<\/a><\/p>\n

\"itero<\/a><\/p>\n

Accordingly to literature data, the metal frameworks showed lower marginal gaps (16.9 microns) than the zirconia copings (21.1-28.4 microns). Nonetheless, all the values recorded on the all ceramic restorations were comparable to the clinically acceptable values of fit stated by the American Dental Association. Particularly, the marginal gaps were between 21.1 e 28.4 micron.
\nSimilarly, the values of internal adaptation were lower in the metal cores; this was probably due to the minimum dimensions of the burs used in CAD-CAM systems to drill the internal surfaces of the all-ceramic cores, determining unsatisfactory values of internal fit at level of the incisal areas (138.8-220-3 micron). Nonetheless, as reported in literature, these parameters do not affect the clinical reliability of all-ceramic cores.<\/p>\n

 <\/p>\n

Statistical analysis<\/strong><\/h3>\n


\n<\/strong>Although with merely speculative purpose because of the limited number of specimens, the marginal and internal values of fit were statistically analyzed by means of univariate ANOVA and Tukey\u2019s post-hoc test (p<0.05).
\nStatistically significant differences were noticed both between the metal and zirconia copings and between the Noritake and Cares zirconia cores..
\nFurthermore, statistically significant differences were recorded in all measurement points, as shown in the table.<\/p>\n

\nConclusions<\/strong><\/h2>\n


\n<\/strong>The digital impression technique proved to be reliable in terms of precision and detail reproduction.
\nThe impression software was very user friendly during both the clinical procedures and the digital prescription phases.
\nNonetheless, a few drawbacks were evidenced and should be implemented in the future. The dimensions of the intraoral scanner were quite big and not very comfortable to reach all intraoral sites; moreover, the weight of the scanner should be reduced in order to make its handling easier.
\nAlthough intraoral powders were not required by the system, the Itero scanner, as well as other intraoral cameras, still requires the use of retraction cords to displace gingival tissues. To date, this still represents the real limit in the clinical use of optical impression techniques, that will become a really revolutionary tool as soon as innovative technologies will allow clinicians to scan
\niuxtagingival and intrasulcular areas directly, making the impression even more comfortable for patients and avoiding any operator-sensitive variable in dental impression making. By the way, it is worth noticing that optical impression techniques allow to scan the impression of single abutments at different times, interpolating multiple partial impressions by stitching; although this reduces the discomfort of patients, such a procedure could negatively affect the precision of scanning in transition areas.
\nThe precision of fit of zirconia copings fabricated using the digital workflow completely satisfied the parameters of marginal precision and internal adaptation reported as clinically valid by scientific literature.
\n<\/i>
\n <\/b>
\nReferences<\/strong>
\n1. Almeida E Silva JS<\/a>, Erdelt K<\/a>, Edelhoff D<\/a>, Ara\u00fajo E<\/a>, Stimmelmayr M<\/a>, Vieira LC<\/a>, G\u00fcth JF<\/a>. Marginal and internal fit of four-unit zirconia fixed dental prostheses based on digital and conventional impression techniques. Clin Oral Investig. 2013 May 29. [Epub ahead of print]
\n2. Brawek PK<\/a>, Wolfart S<\/a>, Endres L<\/a>, Kirsten A<\/a>, Reich S<\/a>. The clinical accuracy of single crowns exclusively fabricated by digital workflow–the comparison of two systems. Clin Oral Investig. 2013 Dec;17(9):2119-25. doi: 10.1007\/s00784-013-0923-5. Epub 2013 Jan 31.
\n3. Seelbach P<\/a>, Brueckel C<\/a>, W\u00f6stmann B<\/a>. Accuracy of digital and conventional impression techniques and workflow. Clin Oral Investig. 2013 Sep;17(7):1759-64. doi: 10.1007\/s00784-012-0864-4. Epub 2012 Oct 21.
\n4. Scotti R<\/a>, Cardelli P<\/a>, Baldissara P<\/a>, Monaco C<\/a>. Clinical fitting of CAD\/CAM zirconia single crowns generated from digital intraoral impressions based on active wavefront sampling. J Dent. 2011 Oct 17. [Epub ahead of print]<\/p>\n","protected":false},"excerpt":{"rendered":"

Stereomicroscopic analysis of the precision of fit of PFM frameworks fabricated with traditional impression vs zirconia prostheses produced using an optical impression technique Case presentation A 42 year-old female patient, unsatisfied by the esthetics of her smile, asked for the rehabilitation of the maxillary incisors by means of fixed prostheses, substituting 4 previous metal-ceramic single crowns.<\/p>\n","protected":false},"author":4,"featured_media":6361,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[44],"tags":[],"coauthors":[26,23,28,30],"class_list":["post-3371","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-prosthetic-dentistry"],"yoast_head":"\nDigital impression: Itero intraoral scanning system to fabricate zirconia single crowns<\/title>\n<meta name=\"description\" content=\"Stereomicroscopic analysis of the precision of fit of PFM frameworks made with traditional impression vs zirconia prostheses made with optical impression\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.zerodonto.com\/en\/2014\/03\/digital-impression-itero-intraoral-scanning\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Digital impression: Itero intraoral scanning system to fabricate zirconia single crowns\" \/>\n<meta property=\"og:description\" content=\"Stereomicroscopic analysis of the precision of fit of PFM frameworks made with traditional impression vs zirconia prostheses made with optical impression\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.zerodonto.com\/en\/2014\/03\/digital-impression-itero-intraoral-scanning\/\" \/>\n<meta property=\"og:site_name\" content=\"Zerodonto | Dentistry in Blog\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/zerodonto\" \/>\n<meta property=\"article:author\" content=\"https:\/\/www.facebook.com\/roberto.sorrentino.923\" \/>\n<meta property=\"article:published_time\" content=\"2014-02-28T23:15:00+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2017-10-20T08:30:41+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.zerodonto.com\/en\/wp-content\/uploads\/2014\/03\/ABC-252520Zirconia-252520oro-252520ceramica_thumb-750x400.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"750\" \/>\n\t<meta property=\"og:image:height\" content=\"400\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"Roberto Sorrentino, Fabio Cozzolino, Dario Mari, Vincenzo Mutone\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"Roberto Sorrentino, Fabio Cozzolino, Dario Mari, Vincenzo Mutone\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"8 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/www.zerodonto.com\\\/en\\\/2014\\\/03\\\/digital-impression-itero-intraoral-scanning\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.zerodonto.com\\\/en\\\/2014\\\/03\\\/digital-impression-itero-intraoral-scanning\\\/\"},\"author\":{\"name\":\"Roberto Sorrentino\",\"@id\":\"https:\\\/\\\/www.zerodonto.com\\\/en\\\/#\\\/schema\\\/person\\\/e8bcc6b23d855e2853fc6bdd45f2c92a\"},\"headline\":\"Digital impression by means of Itero intraoral scanning system to fabricate zirconia single crowns\",\"datePublished\":\"2014-02-28T23:15:00+00:00\",\"dateModified\":\"2017-10-20T08:30:41+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/www.zerodonto.com\\\/en\\\/2014\\\/03\\\/digital-impression-itero-intraoral-scanning\\\/\"},\"wordCount\":1590,\"commentCount\":0,\"image\":{\"@id\":\"https:\\\/\\\/www.zerodonto.com\\\/en\\\/2014\\\/03\\\/digital-impression-itero-intraoral-scanning\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.zerodonto.com\\\/en\\\/wp-content\\\/uploads\\\/2014\\\/03\\\/ABC-252520Zirconia-252520oro-252520ceramica_thumb-750x400.jpg\",\"articleSection\":[\"Prosthetic Dentistry\"],\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\\\/\\\/www.zerodonto.com\\\/en\\\/2014\\\/03\\\/digital-impression-itero-intraoral-scanning\\\/#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.zerodonto.com\\\/en\\\/2014\\\/03\\\/digital-impression-itero-intraoral-scanning\\\/\",\"url\":\"https:\\\/\\\/www.zerodonto.com\\\/en\\\/2014\\\/03\\\/digital-impression-itero-intraoral-scanning\\\/\",\"name\":\"Digital impression: Itero intraoral scanning system to fabricate zirconia single crowns\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.zerodonto.com\\\/en\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/www.zerodonto.com\\\/en\\\/2014\\\/03\\\/digital-impression-itero-intraoral-scanning\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/www.zerodonto.com\\\/en\\\/2014\\\/03\\\/digital-impression-itero-intraoral-scanning\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.zerodonto.com\\\/en\\\/wp-content\\\/uploads\\\/2014\\\/03\\\/ABC-252520Zirconia-252520oro-252520ceramica_thumb-750x400.jpg\",\"datePublished\":\"2014-02-28T23:15:00+00:00\",\"dateModified\":\"2017-10-20T08:30:41+00:00\",\"author\":{\"@id\":\"https:\\\/\\\/www.zerodonto.com\\\/en\\\/#\\\/schema\\\/person\\\/e8bcc6b23d855e2853fc6bdd45f2c92a\"},\"description\":\"Stereomicroscopic analysis of the precision of fit of PFM frameworks made with traditional impression vs zirconia prostheses made with optical impression\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.zerodonto.com\\\/en\\\/2014\\\/03\\\/digital-impression-itero-intraoral-scanning\\\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/www.zerodonto.com\\\/en\\\/2014\\\/03\\\/digital-impression-itero-intraoral-scanning\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/www.zerodonto.com\\\/en\\\/2014\\\/03\\\/digital-impression-itero-intraoral-scanning\\\/#primaryimage\",\"url\":\"https:\\\/\\\/www.zerodonto.com\\\/en\\\/wp-content\\\/uploads\\\/2014\\\/03\\\/ABC-252520Zirconia-252520oro-252520ceramica_thumb-750x400.jpg\",\"contentUrl\":\"https:\\\/\\\/www.zerodonto.com\\\/en\\\/wp-content\\\/uploads\\\/2014\\\/03\\\/ABC-252520Zirconia-252520oro-252520ceramica_thumb-750x400.jpg\",\"width\":750,\"height\":400},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.zerodonto.com\\\/en\\\/2014\\\/03\\\/digital-impression-itero-intraoral-scanning\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/www.zerodonto.com\\\/en\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Digital impression by means of Itero intraoral scanning system to fabricate zirconia single crowns\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.zerodonto.com\\\/en\\\/#website\",\"url\":\"https:\\\/\\\/www.zerodonto.com\\\/en\\\/\",\"name\":\"Zerodonto | Dentistry in Blog\",\"description\":\"\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/www.zerodonto.com\\\/en\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/www.zerodonto.com\\\/en\\\/#\\\/schema\\\/person\\\/e8bcc6b23d855e2853fc6bdd45f2c92a\",\"name\":\"Roberto Sorrentino\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/www.zerodonto.com\\\/en\\\/wp-content\\\/uploads\\\/2014\\\/11\\\/nuovarobavatar-96x96.jpg9f3fd3feb567ccdbb7c544d0a183f7ca\",\"url\":\"https:\\\/\\\/www.zerodonto.com\\\/en\\\/wp-content\\\/uploads\\\/2014\\\/11\\\/nuovarobavatar-96x96.jpg\",\"contentUrl\":\"https:\\\/\\\/www.zerodonto.com\\\/en\\\/wp-content\\\/uploads\\\/2014\\\/11\\\/nuovarobavatar-96x96.jpg\",\"caption\":\"Roberto Sorrentino\"},\"description\":\"Graduated with full marks and honors in Dentistry in 2002 at the University Federico II of Naples. Post-graduate course in \u201cTraditional and implant-supported prosthodontics and restorative biomechanics\u201d (2003); Master of Science and PhD in \u201cDental materials and their clinical applications\u201d at the University of Siena (2004-2006); post-graduate course in \u201cSmile esthetics\u201d (2012). Research Professor of Prosthodontics and Digital Dentistry at the University Federico II of Naples. Qualified as Full and Associate Professor in 2017. Aggregate Professor of Prosthodontics and Digital Dentistry at the University Federico II of Naples and at the University of Siena. Lecturer at several national and international Post-graduate and Master Courses in different Universities. Researcher, expert and consultant for national and international dental companies. Coworker in several PRIN projects and Principal Investigator of a FIRB research project about \u201cBiomechanics and biomimetics in implant-supported prosthodontics\u201d shared between the Second University of Naples and the University \u201cVita Salute San Raffaele\u201d of Milan. Author of more than 130 publications in national and international peer-reviewed scientific journals and co-author of chapters of books on Prosthodontics. Reviewer of more than 30 international peer-reviewed scientific journals. Speaker at national and international meetings. Past President of the Membership and Recruitment Committee of the International Association for Dental Research (IADR). Member of the Academy of Dental Materials (ADM) and of the Italian Society of Dentistry and Maxillo-Facial Surgery (SIOCMF). Past Secretary of the Italian Society of Prosthetic Dentistry and Implant Prosthodontics (SIOPI). Winner of many national and international prizes for research and clinical activity in prosthodontics, esthetic dentistry, biomechanics and dental materials. Co-founder of the dental blog and community Zerodonto (www.zerodonto.com). Complete resume here.\",\"sameAs\":[\"http:\\\/\\\/www.zerodonto.com\",\"https:\\\/\\\/www.facebook.com\\\/roberto.sorrentino.923\"],\"url\":\"https:\\\/\\\/www.zerodonto.com\\\/en\\\/author\\\/robsor\\\/\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Digital impression: Itero intraoral scanning system to fabricate zirconia single crowns","description":"Stereomicroscopic analysis of the precision of fit of PFM frameworks made with traditional impression vs zirconia prostheses made with optical impression","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.zerodonto.com\/en\/2014\/03\/digital-impression-itero-intraoral-scanning\/","og_locale":"en_US","og_type":"article","og_title":"Digital impression: Itero intraoral scanning system to fabricate zirconia single crowns","og_description":"Stereomicroscopic analysis of the precision of fit of PFM frameworks made with traditional impression vs zirconia prostheses made with optical impression","og_url":"https:\/\/www.zerodonto.com\/en\/2014\/03\/digital-impression-itero-intraoral-scanning\/","og_site_name":"Zerodonto | Dentistry in Blog","article_publisher":"https:\/\/www.facebook.com\/zerodonto","article_author":"https:\/\/www.facebook.com\/roberto.sorrentino.923","article_published_time":"2014-02-28T23:15:00+00:00","article_modified_time":"2017-10-20T08:30:41+00:00","og_image":[{"width":750,"height":400,"url":"https:\/\/www.zerodonto.com\/en\/wp-content\/uploads\/2014\/03\/ABC-252520Zirconia-252520oro-252520ceramica_thumb-750x400.jpg","type":"image\/jpeg"}],"author":"Roberto Sorrentino, Fabio Cozzolino, Dario Mari, Vincenzo Mutone","twitter_misc":{"Written by":"Roberto Sorrentino, Fabio Cozzolino, Dario Mari, Vincenzo Mutone","Est. reading time":"8 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.zerodonto.com\/en\/2014\/03\/digital-impression-itero-intraoral-scanning\/#article","isPartOf":{"@id":"https:\/\/www.zerodonto.com\/en\/2014\/03\/digital-impression-itero-intraoral-scanning\/"},"author":{"name":"Roberto Sorrentino","@id":"https:\/\/www.zerodonto.com\/en\/#\/schema\/person\/e8bcc6b23d855e2853fc6bdd45f2c92a"},"headline":"Digital impression by means of Itero intraoral scanning system to fabricate zirconia single crowns","datePublished":"2014-02-28T23:15:00+00:00","dateModified":"2017-10-20T08:30:41+00:00","mainEntityOfPage":{"@id":"https:\/\/www.zerodonto.com\/en\/2014\/03\/digital-impression-itero-intraoral-scanning\/"},"wordCount":1590,"commentCount":0,"image":{"@id":"https:\/\/www.zerodonto.com\/en\/2014\/03\/digital-impression-itero-intraoral-scanning\/#primaryimage"},"thumbnailUrl":"https:\/\/www.zerodonto.com\/en\/wp-content\/uploads\/2014\/03\/ABC-252520Zirconia-252520oro-252520ceramica_thumb-750x400.jpg","articleSection":["Prosthetic Dentistry"],"inLanguage":"en-US","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/www.zerodonto.com\/en\/2014\/03\/digital-impression-itero-intraoral-scanning\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/www.zerodonto.com\/en\/2014\/03\/digital-impression-itero-intraoral-scanning\/","url":"https:\/\/www.zerodonto.com\/en\/2014\/03\/digital-impression-itero-intraoral-scanning\/","name":"Digital impression: Itero intraoral scanning system to fabricate zirconia single crowns","isPartOf":{"@id":"https:\/\/www.zerodonto.com\/en\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.zerodonto.com\/en\/2014\/03\/digital-impression-itero-intraoral-scanning\/#primaryimage"},"image":{"@id":"https:\/\/www.zerodonto.com\/en\/2014\/03\/digital-impression-itero-intraoral-scanning\/#primaryimage"},"thumbnailUrl":"https:\/\/www.zerodonto.com\/en\/wp-content\/uploads\/2014\/03\/ABC-252520Zirconia-252520oro-252520ceramica_thumb-750x400.jpg","datePublished":"2014-02-28T23:15:00+00:00","dateModified":"2017-10-20T08:30:41+00:00","author":{"@id":"https:\/\/www.zerodonto.com\/en\/#\/schema\/person\/e8bcc6b23d855e2853fc6bdd45f2c92a"},"description":"Stereomicroscopic analysis of the precision of fit of PFM frameworks made with traditional impression vs zirconia prostheses made with optical impression","breadcrumb":{"@id":"https:\/\/www.zerodonto.com\/en\/2014\/03\/digital-impression-itero-intraoral-scanning\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.zerodonto.com\/en\/2014\/03\/digital-impression-itero-intraoral-scanning\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.zerodonto.com\/en\/2014\/03\/digital-impression-itero-intraoral-scanning\/#primaryimage","url":"https:\/\/www.zerodonto.com\/en\/wp-content\/uploads\/2014\/03\/ABC-252520Zirconia-252520oro-252520ceramica_thumb-750x400.jpg","contentUrl":"https:\/\/www.zerodonto.com\/en\/wp-content\/uploads\/2014\/03\/ABC-252520Zirconia-252520oro-252520ceramica_thumb-750x400.jpg","width":750,"height":400},{"@type":"BreadcrumbList","@id":"https:\/\/www.zerodonto.com\/en\/2014\/03\/digital-impression-itero-intraoral-scanning\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.zerodonto.com\/en\/"},{"@type":"ListItem","position":2,"name":"Digital impression by means of Itero intraoral scanning system to fabricate zirconia single crowns"}]},{"@type":"WebSite","@id":"https:\/\/www.zerodonto.com\/en\/#website","url":"https:\/\/www.zerodonto.com\/en\/","name":"Zerodonto | Dentistry in Blog","description":"","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.zerodonto.com\/en\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Person","@id":"https:\/\/www.zerodonto.com\/en\/#\/schema\/person\/e8bcc6b23d855e2853fc6bdd45f2c92a","name":"Roberto Sorrentino","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.zerodonto.com\/en\/wp-content\/uploads\/2014\/11\/nuovarobavatar-96x96.jpg9f3fd3feb567ccdbb7c544d0a183f7ca","url":"https:\/\/www.zerodonto.com\/en\/wp-content\/uploads\/2014\/11\/nuovarobavatar-96x96.jpg","contentUrl":"https:\/\/www.zerodonto.com\/en\/wp-content\/uploads\/2014\/11\/nuovarobavatar-96x96.jpg","caption":"Roberto Sorrentino"},"description":"Graduated with full marks and honors in Dentistry in 2002 at the University Federico II of Naples. Post-graduate course in \u201cTraditional and implant-supported prosthodontics and restorative biomechanics\u201d (2003); Master of Science and PhD in \u201cDental materials and their clinical applications\u201d at the University of Siena (2004-2006); post-graduate course in \u201cSmile esthetics\u201d (2012). Research Professor of Prosthodontics and Digital Dentistry at the University Federico II of Naples. Qualified as Full and Associate Professor in 2017. Aggregate Professor of Prosthodontics and Digital Dentistry at the University Federico II of Naples and at the University of Siena. Lecturer at several national and international Post-graduate and Master Courses in different Universities. Researcher, expert and consultant for national and international dental companies. Coworker in several PRIN projects and Principal Investigator of a FIRB research project about \u201cBiomechanics and biomimetics in implant-supported prosthodontics\u201d shared between the Second University of Naples and the University \u201cVita Salute San Raffaele\u201d of Milan. Author of more than 130 publications in national and international peer-reviewed scientific journals and co-author of chapters of books on Prosthodontics. Reviewer of more than 30 international peer-reviewed scientific journals. Speaker at national and international meetings. Past President of the Membership and Recruitment Committee of the International Association for Dental Research (IADR). Member of the Academy of Dental Materials (ADM) and of the Italian Society of Dentistry and Maxillo-Facial Surgery (SIOCMF). Past Secretary of the Italian Society of Prosthetic Dentistry and Implant Prosthodontics (SIOPI). Winner of many national and international prizes for research and clinical activity in prosthodontics, esthetic dentistry, biomechanics and dental materials. Co-founder of the dental blog and community Zerodonto (www.zerodonto.com). Complete resume here.","sameAs":["http:\/\/www.zerodonto.com","https:\/\/www.facebook.com\/roberto.sorrentino.923"],"url":"https:\/\/www.zerodonto.com\/en\/author\/robsor\/"}]}},"_links":{"self":[{"href":"https:\/\/www.zerodonto.com\/en\/wp-json\/wp\/v2\/posts\/3371","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.zerodonto.com\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.zerodonto.com\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.zerodonto.com\/en\/wp-json\/wp\/v2\/users\/4"}],"replies":[{"embeddable":true,"href":"https:\/\/www.zerodonto.com\/en\/wp-json\/wp\/v2\/comments?post=3371"}],"version-history":[{"count":8,"href":"https:\/\/www.zerodonto.com\/en\/wp-json\/wp\/v2\/posts\/3371\/revisions"}],"predecessor-version":[{"id":17232,"href":"https:\/\/www.zerodonto.com\/en\/wp-json\/wp\/v2\/posts\/3371\/revisions\/17232"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.zerodonto.com\/en\/wp-json\/wp\/v2\/media\/6361"}],"wp:attachment":[{"href":"https:\/\/www.zerodonto.com\/en\/wp-json\/wp\/v2\/media?parent=3371"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.zerodonto.com\/en\/wp-json\/wp\/v2\/categories?post=3371"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.zerodonto.com\/en\/wp-json\/wp\/v2\/tags?post=3371"},{"taxonomy":"author","embeddable":true,"href":"https:\/\/www.zerodonto.com\/en\/wp-json\/wp\/v2\/coauthors?post=3371"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}